Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Boardkit* Round Hex Drive Polystyrene Pillars M/M
Click Here for larger image
Series 51302 Type : PP
Boardkit* Round Hex Drive Polystyrene Pillars M/M
Boardkit* Round Hex Drive Polystyrene Pillars M/M
| Part No. | Thread M | Body A/F | Body O/D | Length L | Length 2 | Length 3 | Length 4 |
| Part No. | Thread M | Body A/F | Body O/D | Length L | Length 2 | Length 3 | Length 4 | |||
| PP 3070 15 | M3 | 6 | 7.0 | 15 | 7 | 7 | 7 |  | ||
| PP 3070 20 | M3 | 6 | 7.0 | 20 | 7 | 7 | 7 | | ||
| PP 3070 25 | M3 | 6 | 7.0 | 25 | 7 | 7 | 7 | | ||
| PP 3070 30 | M3 | 6 | 7.0 | 30 | 7 | 7 | 7 | | ||
| PP 3070 40 | M3 | 6 | 7.0 | 40 | 7 | 7 | 7 | | ||
| PP 3070 55 | M3 | 6 | 7.0 | 55 | 7 | 7 | 7 | |
PP type Male/Male Polystyrene pillars are heat and high impact resistant insulating pillars with steel studs zinc plated as thread forms. They are round bodied with a central hexagon spanner location to assist tightening. The Electrical properties are as follows: -
Dissipation factor...IEC 250 4.10 - 4
Insulation resistance...10 - 13 m.ohm
Dielectric constant...IEC 250 2.5
Dielectric strength...DIN 53481 150Kv/mm
Max. Service temp...70 deg. C.
Dissipation factor...IEC 250 4.10 - 4
Insulation resistance...10 - 13 m.ohm
Dielectric constant...IEC 250 2.5
Dielectric strength...DIN 53481 150Kv/mm
Max. Service temp...70 deg. C.
Request information about:
Series: 51302 Type: PP Boardkit* Round Hex Drive Polystyrene Pillars M/M