Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Springlok* Spring Steel Compression Rings
Click Here for larger image
Series 40601 Type : CR
Springlok* Spring Steel Compression Rings
Springlok* Spring Steel Compression Rings
| Part No. | Hub Diam. | Dim. A | Dim. B | Dim. T |
| Part No. | Hub Diam. | Dim. A | Dim. B | Dim. T | |||
| CR 1794 | 6.4 | 5.94 | 4.0 | 0.46 |  | ||
| CR 0842 | 6.4 | 6.2 | 4.1 | 0.36 | | ||
| CR 1921 | 7.2 | 6.6 | 6.3 | 0.51 | | ||
| CR 1939 | 8.0 | 7.37 | 6.3 | 0.61 | | ||
| CR 1876 | 8.0 | 7.62 | 6.3 | 0.38 | | ||
| CR 2246 | 8.0 | 7.67 | 6.3 | 0.46 | | ||
| CR 2045 | 8.79 | 8.08 | 6.3 | 0.35 | | ||
| CR 1963 | 8.8 | 7.8 | 6.3 | 0.46 | | ||
| CR 2186 | 9.58 | 8.97 | 4.1 | 0.71 | | ||
| CR 1609 | 9.58 | 9.14 | 6.3 | 0.61 | | ||
| CR 1730 | 9.58 | 9.14 | 6.3 | 0.71 | | ||
| CR 40515 | 9.6 | 9.1 | 6.3 | 0.38 | | ||
| CR 1853 | 10.3 | 9.7 | 6.3 | 0.61 | | ||
| CR 1828 | 11.1 | 10.59 | 7.9 | 0.81 | | ||
| CR 1937 | 12.78 | 11.73 | 6.3 | 0.61 | | ||
| CR 2125 | 14.27 | 12.7 | 6.3 | 0.61 | |
CR Compression Rings are designed to create a compressive force to the outside diameter of a plastic moulded knob hub, thereby closing the gap on the hub to create a tighter fit of the knob hub onto the shaft. This increases the pull of load required to remove the knob from the shaft.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
Request information about:
Series: 40601 Type: CR Springlok* Spring Steel Compression Rings