Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Springlok* Coiled Type Knob Clips
Click Here for larger image
Series 40506 Type : KCC
Springlok* Coiled Type Knob Clips
Springlok* Coiled Type Knob Clips
| Part No. | Dim D1 | Dim D2 | Dim H | Dim b | Dim h | Dim I | Dim T |
| Part No. | Dim D1 | Dim D2 | Dim H | Dim b | Dim h | Dim I | Dim T | |||
| KCC 042010 | 4.0 | 3.5 | 3.7 | 4.0 | 6.75 | 8.30 | .25 |  | ||
| KCC 053712 | 4.9 | 4.0 | 4.0 | 4.0 | 6.80 | 8.30 | .40 | | ||
| KCC 043579 | 6.0 | 4.0 | 4.0 | 4.2 | 6.75 | 8.30 | .30 | | ||
| KCC 043579 | 6.0 | 4.5 | 4.7 | 4.2 | 6.75 | 8.30 | .30 | | ||
| KCC 042010 | 6.0 | 5.3 | 5.5 | 4.0 | 6.75 | 8.30 | .25 | | ||
| KCC 043579 | 6.0 | 5.3 | 5.5 | 4.2 | 6.75 | 8.30 | .30 | | ||
| KCC 18700 | 6.3 | 4.8 | N/A | 6.0 | 6.75 | 8.30 | .30 | |
KCC Coiled type Knob Clips provide the designer with an easy method of location and retention of plastic knobs to shafts. The design is such that the coil maintains spring pressure on the shaft at all times and will therefore take up any slight variations in the shaft tolerances.
HSL in line with all other manufacturers of spring steel clips refuses to accept liability for any premature failure of any spring steel part it supplies that has been specified by the customer with an Electro-Plated Finish, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
HSL in line with all other manufacturers of spring steel clips refuses to accept liability for any premature failure of any spring steel part it supplies that has been specified by the customer with an Electro-Plated Finish, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
Request information about:
Series: 40506 Type: KCC Springlok* Coiled Type Knob Clips