Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Springlok* Spring Steel Edge Clips 3
Click Here for larger image
Series 40501 Type : EC3
Springlok* Spring Steel Edge Clips 3
Springlok* Spring Steel Edge Clips 3
| Part No. | Panel Range | Dim. I | Dim. I1 | Dim h | Dim h1 | T | Clip Width | Form |
| Part No. | Panel Range | Dim. I | Dim. I1 | Dim h | Dim h1 | T | Clip Width | Form | |||
| EC 041619 | 1.5 | 8.5 | 8.0 | 2.9 | 1.5 | 0.3 | 12.5 | 5 |  | ||
| EC 041710 | 3.5 | 8.0 | 8.0 | 3.8 | 2.75 | 0.4 | 13.0 | 2 | | ||
| EC 041794 | 0.8 - 1.7 | 4.0 | 6.0 | 1.8 | 0.6 | 0.3 | 10.5 | 7 | | ||
| EC 041802 | 1.5 - 2.0 | 12.5 | 10.5 | 2.0 | 1.2 | 0.5 | 15.0 | 2 | | ||
| EC 042194 | 1.5 | 10.4 | 10.4 | 2.0 | 0.5 | 0.4 | 16.0 | 2 | | ||
| EC 042237 | 2.0 - 2.5 | 14.0 | 12.0 | 2.6 | 1.6 | 0.5 | 20.0 | 2 | | ||
| EC 042279 | 0.9 - 1.4 | 6.0 | 4.0 | 1.8 | 0.8 | 0.3 | 10.5 | 4 | | ||
| EC 042412 | 4.0 | 12.5 | 8.75 | 4.4 | 3.8 | 0.5 | 12.5 | 1 | | ||
| EC 042494 | 2.5 - 2.8 | 4.0 | 6.0 | 2.8 | 1.5 | 0.3 | 10.5 | 7 | | ||
| EC 042614 | 0.75 - 0.9 | 4.2 | 6.2 | 1.2 | 0.2 | 0.5 | 10.5 | 7 | | ||
| EC 042874 | 12.0 - 13.0 | 14.0 | 10.0 | 13.0 | 9.0 | 0.4 | 13.0 | 9 | | ||
| EC 042949 | 1.75 - 2.0 | 14.5 | 10.0 | 2.3 | 1.2 | 0.4 | 15.0 | 1 | | ||
| EC 043099 | 1.75 - 2.25 | 8.75 | 8.0 | 2.4 | 0.8 | 0.4 | 12.75 | 6 | | ||
| EC 043549 | 1.2 | 8.75 | 8.75 | 1.6 | 0.4 | 0.4 | 12.7 | 2 | | ||
| EC 043553 | 1.0 - 2.0 | 8.75 | 8.0 | 2.4 | 0.8 | 0.4 | 12.75 | 6 | | ||
| EC 043648 | 8.0 | 22.0 | 14.0 | 8.5 | 5.3 | 0.5 | 20.0 | 1 | | ||
| EC 043706 | 4.0 | 14.5 | 13.8 | 4.2 | 0.7 | 0.5 | 6.2 | 9 | | ||
| EC 043750 | 3.0 - 4.5 | 12.0 | 12.0 | 5.0 | 1.0 | 0.5 | 25.0 | 9 | | ||
| EC 043779 | 0.7 - 1.0 | 7.0 | 7.0 | 1.2 | 0.3 | 0.4 | 6.5 | 2 | | ||
| EC 043846 | 2.0 | 13.0 | 15.0 | 2.5 | 0.7 | 0.5 | 16.2 | 4 | | ||
| EC 044244 | 1.25 - 1.5 | 6.85 | 6.85 | 1.5 | 0.7 | 0.4 | 6.5 | 9 | | ||
| EC 044245 | 2.0 - 2.2 | 8.75 | 8.75 | 2.75 | 1.8 | 0.5 | 20.0 | 4 | | ||
| EC 044593 | 2.4 | 7.5 | 8.0 | 2.4 | 0 | 0.3 | 30.0 | 4 | | ||
| EC 052904 | 3.0 - 6.0 | 25.0 | 25.0 | 6.0 | 2.0 | 0.1 | 20.0 | 3 | | ||
| EC 052905 | 7.0 - 10.0 | 35.0 | 35.0 | 11.0 | 4.0 | 0.1 | 20.0 | 3 | | ||
| EC 053315 | 2.5 | 12.7 | 8.7 | 2.8 | 2.4 | 0.5 | 12.7 | 1 | | ||
| EC 053327 | 2.8 - 3.3 | 8.7 | 8.7 | 3.6 | 2.0 | 0.5 | 12.7 | 2 | | ||
| EC 053414 | 3.0 | 12.2 | 8.7 | 3.3 | 2.9 | 0.5 | 12.7 | 1 | | ||
| EC 053419 | 1.8 - 2.0 | 13.7 | 8.0 | 2.0 | 1.6 | 0.5 | 12.7 | 1 | | ||
| EC 053437 | 5.8 - 7.2 | 18.2 | 14.2 | 7.0 | 4.0 | 0.4 | 12.0 | 5 | | ||
| EC 053438 | 2.5 - 3.5 | 8.6 | 8.3 | 4.0 | 2.0 | 0.4 | 12.7 | 3 | | ||
| EC 053804 | 3.5 | 11.0 | 11.0 | 4.0 | 0.6 | 0.4 | 13.0 | 3 | | ||
| EC 053917 | 7.6 | 15.0 | 13.0 | 10.6 | 7.0 | 0.4 | 15.0 | 8 | | ||
| EC 054005 | 2.45 - 2.75 | 12.5 | 11.5 | 3.8 | 0.3 | 0.6 | 20.0 | 9 | | ||
| EC 054006 | 4.2 - 4.5 | 12.7 | 12.7 | 6.0 | 0.3 | 0.3 | 20.0 | 9 | | ||
| EC 054141 | 2.45 - 4.5 | 12.7 | 11.7 | 5.3 | 0.3 | 0.6 | 20.0 | 9 | | ||
| EC 054231 | 4.5 - 6.0 | 21.3 | 19.3 | 3.7 | 3.5 | 0.7 | 12.0 | 9 | |
EC3 Edge Clips have nine forms to cater for variations in the applications they are required to fit. These quick fit versatile fasteners are available in a wide selection of panel ranges to satisfy any conceivable application. These parts are usually supplied in a black phosphate finish.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer, due to the uncertainty of the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer, due to the uncertainty of the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
Request information about:
Series: 40501 Type: EC3 Springlok* Spring Steel Edge Clips 3