Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Springlok* Rectangular Spring Steel Push on Fix
Click Here for larger image
Series 40401 Type : POF
Springlok* Rectangular Spring Steel Push on Fix
Springlok* Rectangular Spring Steel Push on Fix
| Part No. | Stud Diam. | Dim A | Dim. B | Dim. T | Min Protrusion |
| Part No. | Stud Diam. | Dim A | Dim. B | Dim. T | Min Protrusion | |||
| POF 2113 | 2.92/3.05 | 12.7 | 7.9 | 0.36 | 3.96 |  | ||
| POF 1833 | 3.10/3.20 | 12.7 | 7.9 | 0.30 | 3.96 | | ||
| POF 0211* | 3.10/3.20 | 12.7 | 7.9 | 0.36 | 3.96 | | ||
| POF 0212 | 3.89/3.99 | 14.2 | 9.6 | 0.38 | 4.77 | | ||
| POF 0213* | 4.67/4.80 | 15.7 | 9.6 | 0.38 | 4.77 | | ||
| POF 2114 | 4.93/5.05 | 15.7 | 9.6 | 0.38 | 4.77 | | ||
| POF 0215 | 6.25/6.40 | 19.1 | 12.7 | 0.41 | 5.54 | | ||
| POF 0216 | 7.85/8.00 | 22.1 | 16.0 | 0.41 | 6.35 | |
The * in the part no. denotes that these parts are regularly used and therefore could be available from stock or on shorter lead times than parts not marked. POF Rectangular Push on Fixes allow the designer to not only provide a very fast lightweight method of securing the location of a shaft or the location of a component upon a shaft but also if the edges of the push on fix were designed to butt against a stop then these clips also offer the possibility of preventing the shaft from rotating under light loads.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies that has been specified, by the customer, with an Electro-Plated Finish, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
HSL, in line with all other manufacturers of spring steel clips, refuses to accept liability for any premature failure of any spring steel part it supplies that has been specified, by the customer, with an Electro-Plated Finish, due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
Request information about:
Series: 40401 Type: POF Springlok* Rectangular Spring Steel Push on Fix