Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Springlok* Domed Chrome Cap For Dished Push on Fix
Click Here for larger image
Series 40401 Type : DC
Springlok* Domed Chrome Cap For Dished Push on Fix
Springlok* Domed Chrome Cap For Dished Push on Fix
| Part No. | O/D E inch/MM | Dim. F inch/MM | Height G inchMM |
| Part No. | O/D E inch/MM | Dim. F inch/MM | Height G inchMM | |||
| DC 0 | 0.285/07.20 | 0.055/1.40 | 0.105/02.70 |  | ||
| DC 1 | 0.420/10.67 | 0.100/2.54 | 0.120/03.05 | | ||
| DC 2 | 0.485/13.32 | 0.120/3.05 | 0.148/03.76 | | ||
| DC 3 | 0.640/16.32 | 0.160/4.06 | 0.200/05.08 | | ||
| DC 4 | 0.780/19.81 | 0.177/4.50 | 0.230/05.80 | | ||
| DC 5 | 1.025/26.00 | 0.236/6.00 | 0.295/07.50 | | ||
| DC 6 | 1.157/29.40 | 0.276/7.00 | 0.354/09.00 | | ||
| DC 7 | 1.505/38.20 | 0.343/8.70 | 0.460/11.70 | | ||
| DC 8 | 1.565/39.80 | 0.375/9.53 | 0.510/12.95 | | ||
| DC 9 | 1.695/43.00 | 0.375/9.53 | 0.490/12.45 | |
DC Domed Caps are decorative chrome finished mushroom shaped caps for use with the dished push on fix type POFD products. They provide the designer with the opportunity of covering the exposed end of the shaft creating a smooth attractive finish to the end product.
HSL in line with all other manufacturers of spring steel clips refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer. This is due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
HSL in line with all other manufacturers of spring steel clips refuses to accept liability for any premature failure of any spring steel part it supplies with an Electro-Plated Finish that has been specified by the customer. This is due to uncertainty regarding the incidence of, identification of, control of and removal of Hydrogen Embrittlement. Despite accurate processing controls, baking cannot be relied upon to guarantee removal of Hydrogen. We strongly recommend alternative finishes be specified.
Request information about:
Series: 40401 Type: DC Springlok* Domed Chrome Cap For Dished Push on Fix