fastener solutions at the concept of your design

Request a sample

Got a question

or an enquiry?

Click here and our friendly staff
will be happy to assist you.

Click here for a PDF
version of this page.

All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples

Springfix* All Stainless Steel Cage Nuts

Click Here for larger image

Series 40112 Type : CNSS
Springfix* All Stainless Steel Cage Nuts

Part No.

Thread M

Panel Range

Dim. A

Dim. C

Dim. D

Dim. E

Dim. G

Hole Size

Material Nut

Material Cage

Part No.	Thread M	Panel Range	Dim. A	Dim. C	Dim. D	Dim. E	Dim. G	Hole Size	Material Nut	Material Cage
M4 6741	M4	0.7 - 1.6	10.0	7.2	5.8	0.45	4.8	6.7	304	304
M4 6742	M4	1.8 - 2.6	10.0	8.2	5.8	0.45	4.8	6.7	304	304
M5 8351	M5	1.2 - 1.6	12.0	8.5	7.2	0.45	6.0	8.3	304	304
M5 8352	M5	1.7 - 2.5	12.0	9.5	7.2	0.45	6.0	8.3	304	304
M5 9551	M5	0.7 - 1.6	13.2	8.7	8.2	0.50	6.5	9.5	304	304
M5 9552	M5	1.7 - 2.7	13.2	9.5	8.2	0.50	6.5	9.5	304	304
M6 8362	M6	1.7 - 2.5	12.0	9.5	7.2	0.45	6.0	8.3	304	304
M6 8363	M6	2.6 - 3.5	12.0	10.5	7.2	0.45	6.0	8.3	304	304
M6 9561	M6	0.7 - 1.6	13.2	8.3	8.2	0.50	6.5	9.5	304	304
M6 9562	M6	1.7 - 2.7	13.2	9.3	8.2	0.50	6.5	9.5	304	304
M6 9563	M6	2.8 - 3.5	13.2	10.2	8.2	0.50	6.5	9.5	304	304
M8 12381	M8	1.0 - 1.7	16.0	10.4	10.6	0.50	7.8	12.3	304	304
M8 12382	M8	1.8-3.2	16.0	12.0	10.6	0.50	7.8	12.3	304	304
M10 12311	M10	1.0-1.7	16.0	10.4	10.6	0.50	7.8	12.3	304	304
M10 12312	M10	1.8 - 3.2	16.0	12.0	10.6	0.50	7.8	12.3	304	304
M10 14102	M10	1.8-3.2	20.0	16.5	12.6	0.60	10.4	14.0	304	304
M10 14103	M10	3.3 - 4.7	20.0	16.5	12.6	0.60	10.4	14.0	304	304
M12 14122	M12	1.8-3.2	20.0	16.5	12.6	0.60	10.4	14.0	304	304
M12 14123	M12	3.3 - 4.7	20.0	16.5	12.6	0.60	10.4	14.0	304	304

CNSS Cage Nuts represent the traditional European metric size based products used for years in all aspects of European manufacturing. The greater variation on panel ranges has allowed these products to superceed the traditional UK sizes which were limited to only two panel ranges.They are totally interchangeable with the old standards but offer the designer greater choice of Hole Sizes and Panel thicknesses. They are particularly usefull where the advantage of floating thread forms are required to overcome out of tolerance mating parts. The fact that the nut floats in the cage offers a simple cost effective solution to this otherwise expensive problem. The cage nut can be used in blind applications; it can be fitted after painting of the panels and so offers the designer lots of advantages. Available from stock in all Stainless Steel. Alternatively they can be provided with an RoHS compliant zinc & clear passivated nut.

Request information about:

Series: 40112 Type: CNSS Springfix* All Stainless Steel Cage Nuts