Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Boardkit* Broachcert* Broaching Stand Off For PCB
Click Here for larger image
Series 30318 Type : BSO
Boardkit* Broachcert* Broaching Stand Off For PCB
Boardkit* Broachcert* Broaching Stand Off For PCB
| Part No. | Thread M | Through Hole | Suitable Sheet | Body Diam. B | Lead Diam. A | Hole Size | Length to suit | Thread Length |
| Part No. | Thread M | Through Hole | Suitable Sheet | Body Diam. B | Lead Diam. A | Hole Size | Length to suit | Thread Length | |||
| BSO 3.6??ET | - | 3.6 | 1.6 | 7.14 | 5.87 | 5.40 | 3/4/6/8 | - |  | ||
| BSO 3.6??ET | - | 3.6 | 1.6 | 7.14 | 5.87 | 5.40 | 10/12/14/16 | - | | ||
| BSO 3.6??SS | - | 3.6 | 1.6 | 7.14 | 5.87 | 5.40 | 10/12/14/16 | - | | ||
| BSO 3.6??SS | - | 3.6 | 1.6 | 7.14 | 5.87 | 5.40 | 3/4/6/8 | - | | ||
| BSO 4.2??ET | - | 4.2 | 1.6 | 8.74 | 6.81 | 6.40 | 3/4/6/8 | - | | ||
| BSO 4.2??ET | - | 4.2 | 1.6 | 8.74 | 6.81 | 6.40 | 10/12/14/16 | - | | ||
| BSO 4.2??SS | - | 4.2 | 1.6 | 8.74 | 6.81 | 6.40 | 10/12/14/16 | - | | ||
| BSO 4.2??SS | - | 4.2 | 1.6 | 8.74 | 6.81 | 6.40 | 3/4/6/8 | - | | ||
| BSO M3??ET | M3 | - | 1.6 | 5.56 | 4.68 | 4.20 | 10/12/14/16 | Max. 9.5 | | ||
| BSO M3??ET | M3 | - | 1.6 | 5.56 | 4.68 | 4.20 | 3/4/6/8 | Full-9.5 | | ||
| BSO M3??SS | M3 | - | 1.6 | 5.56 | 4.68 | 4.20 | 10/12/14/16 | Max. 9.5 | | ||
| BSO M3??SS | M3 | - | 1.6 | 5.56 | 4.68 | 4.20 | 3/4/6/8 | Full-9.5 | |
Substitute the stand off length for the ?? in the part no. to specify the exact part required.
Type BSO Broaching stand-offs are produced in Carbon Steel and Electro Tinned code ET, or Stainless Steel passivated code SS and are for use in Circuit boards or thin sheet materials softer than RB-65. The broaching action during installation creates satisfactory retention in the board, the threaded and non-threaded stand-offs allow screws to be inserted through multiple layered boards for stacked assemblies.
Type BSO Broaching stand-offs are produced in Carbon Steel and Electro Tinned code ET, or Stainless Steel passivated code SS and are for use in Circuit boards or thin sheet materials softer than RB-65. The broaching action during installation creates satisfactory retention in the board, the threaded and non-threaded stand-offs allow screws to be inserted through multiple layered boards for stacked assemblies.
Request information about:
Series: 30318 Type: BSO Boardkit* Broachcert* Broaching Stand Off For PCB