Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Boardkit* Broachcert* Broaching Nut For PCB
Click Here for larger image
Series 30305 Type : BN
Boardkit* Broachcert* Broaching Nut For PCB
Boardkit* Broachcert* Broaching Nut For PCB
| Part No. | Thread M | Suitable Sheet | Body Diam B | Body Depth C | Lead Diam. A | Hole Size P | Min dim.X |
| Part No. | Thread M | Suitable Sheet | Body Diam B | Body Depth C | Lead Diam. A | Hole Size P | Min dim.X | |||
| BN-M2.5 | M2.5 | 1.6 | 5.56 | 1.5 | 4.68 | 4.2 | 4.5 |  | ||
| BN-M3 | M3 | 1.6 | 5.56 | 1.5 | 4.68 | 4.2 | 4.4 | | ||
| BN-M4 | M4 | 1.6 | 8.74 | 2.0 | 6.81 | 6.4 | 6.4 | | ||
| BN-M5 | M5 | 1.6 | 9.53 | 3.0 | 7.37 | 6.9 | 7.1 | | ||
| BNS-M2.5 | M2.5 | 1.6 | 5.56 | 1.5 | 4.68 | 4.2 | 4.5 | | ||
| BNS-M3 | M3 | 1.6 | 5.56 | 1.5 | 4.68 | 4.2 | 4.4 | | ||
| BNS-M4 | M4 | 1.6 | 8.74 | 2.0 | 6.81 | 6.4 | 6.4 | | ||
| BNS-M5 | M5 | 1.6 | 9.53 | 3.0 | 7.37 | 6.9 | 7.1 | |
Type BN Broaching nuts are produced in Carbon Steel and Electro Tinned code ET, Zinc and clear passivated code 60, or Stainless Steel passivated code SS and are for use in Circuit boards or thin sheet materials softer than RB-65. The broaching action during installation creates satisfactory retention in the board and the threaded nuts allow assembly of components on to the board which are considered too heavy for solder retention only.
Request information about:
Series: 30305 Type: BN Boardkit* Broachcert* Broaching Nut For PCB