Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples

HiTorque* Flat Head Closed Rivet Nuts

Click Here for larger image
Series 30260 Type : TPB
HiTorque* Flat Head Closed Rivet Nuts
HiTorque* Flat Head Closed Rivet Nuts

| Part No. | Thread M | Panel Size S | Body Diam. D | Head Dim. E | Head Diam. T | Length L | Hole size P |
TPB Hi Torque Flat Head closed end blind Rivet Nuts are manufactured as turned parts to ensure the accuracy of the concentricity between the outer diameter of the body and the inner wall of the counter bore. Only by accurate machining can the wall remain a constant thickness around the circumference, ensuring that when the products are set, the wall collapses uniformly keeping the thread forms perpendicular to the sheet. This ensures that the threads will not become crossed on installation of the mating screw. The other advantage gained by turning the rivet nut is that a highly effective knurl can be produced on the outside of the body where the clinch takes effect with the sheet. Not only does this mean that the knurl engages the back of the sheet to improve torque resistance performance the knurl also swells to grip the walls of the hole during installation, again improving torque resistance and increasing surface area contact. These products are manufactured in various head and body formats see following part Nos. Hi Torque Rivet Nuts are available in Carbon Steel Zinc plated and Yellow passivated, Code 40 and in Stainless Steel, Code SS.
Request information about:
Series: 30260 Type: TPB HiTorque* Flat Head Closed Rivet Nuts




