Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Sonicert* Ultrasonic stake Insert for Thermoplastic
Click Here for larger image
Series 20111 Type : SHV
Sonicert* Ultrasonic stake Insert for Thermoplastic
Sonicert* Ultrasonic stake Insert for Thermoplastic
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Hole diam. +.1 | Rec. dia. E +.1 |
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Hole diam. +.1 | Rec. dia. E +.1 | |||
| SHV020H029 | M2 | 2.90 | 3.60 | 3.00 | 3.00 | 3.10 |  | ||
| SHV020H048 | M2 | 4.80 | 3.60 | 2.85 | 2.70 | 3.10 | | ||
| SHV025H035 | M2.5 | 3.45 | 4.40 | 3.95 | 3.90 | 4.05 | | ||
| SHV025H056 | M2.5 | 5.55 | 4.40 | 3.70 | 3.60 | 4.05 | | ||
| SHV030H038 | M3 | 3.80 | 5.60 | 5.15 | 5.05 | 5.25 | | ||
| SHV030H064 | M3 | 6.35 | 5.60 | 4.85 | 4.70 | 5.25 | | ||
| SHV035H038 | M3.5 | 3.80 | 5.60 | 5.15 | 5.05 | 5.25 | | ||
| SHV035H064 | M3.5 | 6.35 | 5.60 | 4.85 | 4.70 | 5.25 | | ||
| SHV040H047 | M4 | 4.70 | 6.30 | 5.85 | 5.75 | 5.95 | | ||
| SHV040H079 | M4 | 7.90 | 6.30 | 5.40 | 5.30 | 5.95 | | ||
| SHV050H068 | M5 | 6.75 | 8.40 | 7.85 | 7.70 | 8.00 | | ||
| SHV050H112 | M5 | 11.15 | 8.40 | 7.20 | 7.05 | 8.00 | | ||
| SHV060H076 | M6 | 7.60 | 9.60 | 9.05 | 8.85 | 9.20 | | ||
| SHV060H127 | M6 | 12.70 | 9.60 | 8.30 | 8.15 | 9.20 | | ||
| SHV080H143 | M8 | 14.25 | 11.90 | 10.30 | 10.20 | 11.40 | |
Heat-Ultrasonic Inserts 20111 SHV have a tapered design which seats the insert into the hole to maximise the surface contact between the insert and plastic prior to the application of heat or ultrasonic vibrations. The result is reduced installation time, lower radial stresses and improved filling of grooves and knurls with plastic for reliable and consistent performance. This long version is recommended where high torque and pullout performance is the criteria and the plastic component can accommodate the length.
Request information about:
Series: 20111 Type: SHV Sonicert* Ultrasonic stake Insert for Thermoplastic