Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Thermocert* Heatstake Insert for Thermoplastic
Click Here for larger image
Series 20111 Type : SHV
Thermocert* Heatstake Insert for Thermoplastic
Thermocert* Heatstake Insert for Thermoplastic
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Diam. D +.1 | Rec. dia. E +.1 |
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Diam. D +.1 | Rec. dia. E +.1 | |||
| SHV020H029 | M2 | 2.90 | 3.60 | 3.00 | 3.00 | 3.10 |  | ||
| SHV020H048 | M2 | 4.80 | 3.60 | 2.85 | 2.70 | 3.10 | | ||
| SHV025H035 | M2.5 | 3.45 | 4.40 | 3.95 | 3.90 | 4.05 | | ||
| SHV025H056 | M2.5 | 5.55 | 4.40 | 3.70 | 3.60 | 4.05 | | ||
| SHV030H038 | M3 | 3.80 | 5.60 | 5.15 | 5.05 | 5.25 | | ||
| SHV030H064 | M3 | 6.35 | 5.60 | 4.85 | 4.70 | 5.25 | | ||
| SHV035H038 | M3.5 | 3.80 | 5.60 | 5.15 | 5.05 | 5.25 | | ||
| SHV035H064 | M3.5 | 6.35 | 5.60 | 4.85 | 4.70 | 5.25 | | ||
| SHV040H047 | M4 | 4.70 | 6.30 | 5.85 | 5.75 | 5.95 | | ||
| SHV040H079 | M4 | 7.90 | 6.30 | 5.40 | 5.30 | 5.95 | | ||
| SHV050H068 | M5 | 6.75 | 8.40 | 7.85 | 7.70 | 8.00 | | ||
| SHV050H112 | M5 | 11.15 | 8.40 | 7.20 | 7.05 | 8.00 | | ||
| SHV060H076 | M6 | 7.60 | 9.60 | 9.05 | 8.85 | 9.20 | | ||
| SHV060H127 | M6 | 12.70 | 9.60 | 8.30 | 8.15 | 9.20 | | ||
| SHV080H143 | M8 | 14.25 | 11.90 | 10.30 | 10.20 | 11.40 | |
Heat-Ultrasonic Inserts SHV have a tapered design that seats the insert into the hole to maximise the surface contact between the insert and plastic prior to the application of heat or ultrasonic vibrations. The result is reduced installation time, lower radial stresses and improved filling of grooves and knurls with plastic for reliable and consistent performance. This short version offers the advantage of shorter installation time and lower cost for applications with less stringent tensile and torque requirements, or space limitations.
Request information about:
Series: 20111 Type: SHV Thermocert* Heatstake Insert for Thermoplastic