Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Sonicert* Ultrasonic Headed Insert stud for Thermoplastic
Click Here for larger image
Series 20111 Type : HTS
Sonicert* Ultrasonic Headed Insert stud for Thermoplastic
Sonicert* Ultrasonic Headed Insert stud for Thermoplastic
| Part No. | Thread A | Ext. diam. E | Head dia. E1 | Head thicken K | Length B | Stud length S | Hole dia. L+0.1 | Min Wall W |
| Part No. | Thread A | Ext. diam. E | Head dia. E1 | Head thicken K | Length B | Stud length S | Hole dia. L+0.1 | Min Wall W | |||
| HTS020L_ | M2.0 | 4.10 | 5.60 | 0.60 | 5.60 | 6-16 | 3.80 | 1.50 |  | ||
| HTS025L_ | M2.5 | 4.10 | 5.60 | 0.60 | 5.60 | 6-16 | 3.80 | 1.50 | | ||
| HTS030L_ | M3.0 | 4.60 | 6.40 | 0.60 | 6.10 | 6-16 | 4.40 | 1.80 | | ||
| HTS035L_ | M3.5 | 5.40 | 7.20 | 0.80 | 6.80 | 6-25 | 5.20 | 1.80 | | ||
| HTS040L_ | M4.0 | 6.00 | 8.00 | 0.80 | 8.30 | 6-25 | 5.80 | 2.00 | | ||
| HTS050L_ | M5.0 | 7.20 | 9.00 | 1.00 | 10.00 | 6-25 | 6.90 | 2.00 | | ||
| HTS060L_ | M6.0 | 8.80 | 10.00 | 1.30 | 11.30 | 6-25 | 8.50 | 2.50 | | ||
| HTS080L_ | M8.0 | 11.20 | 12.50 | 1.30 | 13.30 | 10-25 | 10.90 | 3.00 | |
HTS Taperlock Series studs are designed to provide strong wear resistant threads in thermoplastic materials. The unique diametrically opposing herringbone knurl design provides exceptional resistance to torque loads and facilitates the flow of plastic into the two recessed grooves thus providing greater pull-out strength than other designs.
Request information about:
Series: 20111 Type: HTS Sonicert* Ultrasonic Headed Insert stud for Thermoplastic