Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Spancert* Expansion Insert for Thermoplastic
Click Here for larger image
Series 20110 Type : MV
Spancert* Expansion Insert for Thermoplastic
Spancert* Expansion Insert for Thermoplastic
| Part No. | Thread A | Ext. Diam. E | Length B | No. of Vanes | Min Wall W | Hole Size L |
| Part No. | Thread A | Ext. Diam. E | Length B | No. of Vanes | Min Wall W | Hole Size L | |||
| MV020H040 | M2.0 | 3.45 | 4.00 | 2 | 1.6 | 3.2 |  | ||
| MV025H048 | M2.5 | 4.30 | 4.80 | 3 | 2.0 | 4.0 | | ||
| MV030H048 | M3.0 | 4.30 | 4.80 | 3 | 2.0 | 4.0 | | ||
| MV035H064 | M3.5 | 5.10 | 6.40 | 3 | 2.4 | 4.8 | | ||
| MV040H080 | M4.0 | 5.90 | 8.00 | 4 | 2.8 | 5.6 | | ||
| MV050H095 | M5.0 | 6.70 | 9.50 | 5 | 3.2 | 6.4 | | ||
| MV060H127 | M6.0 | 8.30 | 12.70 | 5 | 4.0 | 8.0 | | ||
| MV080H127 | M8.0 | 9.90 | 12.70 | 5 | 4.8 | 9.5 | |
MV inserts are recommended for thermoplastic applications. Their geometric shape and sharp pointed vanes eliminate any danger of the moulded bosses splitting on installation or when tightening of the mating screw occurs. The wall thickness of bosses should generally be at least one half of the insert diameter. Different materials may require slight modifications to the hole dimensions stated above and it is essential that the hole depth is sufficient to allow the screw to pass completely through the insert to achieve optimum performance.
Request information about:
Series: 20110 Type: MV Spancert* Expansion Insert for Thermoplastic