Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Spancert* Expansion Insert for Wood
Click Here for larger image
Series 20110 Type : FV
Spancert* Expansion Insert for Wood
Spancert* Expansion Insert for Wood
| Part No. | Thread A | Ext. Diam. E | Length B | No. of fins | Hole Diam. L |
| Part No. | Thread A | Ext. Diam. E | Length B | No. of fins | Hole Diam. L | |||
| FV025H048 | M2.5 | 5.35 | 4.80 | 1 | 4.5 - 4.7 |  | ||
| FV030H048 | M3.0 | 5.35 | 4.80 | 1 | 4.5 - 4.7 | | ||
| FV035H048 | M3.5 | 6.00 | 4.80 | 1 | 5.2 - 5.4 | | ||
| FV040H095 | M4.0 | 6.65 | 9.50 | 2 | 5.8 - 6.0 | | ||
| FV050H095 | M5.0 | 7.35 | 9.50 | 2 | 6.5 - 6.7 | | ||
| FV060H095 | M6.0 | 9.05 | 9.50 | 2 | 8.2 - 8.4 | | ||
| FV080H143 | M8.0 | 12.50 | 14.30 | 3 | 11.8 - 12.0 | |
FV inserts are recommended for Wood and Composite applications. Their geometric shape and sharp pointed fins eliminate any danger of the substrate splitting on installation or when tightening of the mating screw occurs. The distance from the edge of the product to the outside of the hole diameter should generally be at least that of the insert diameter. Different materials may require slight modifications to the hole dimensions stated above and it is essential that the hole depth is sufficient to allow the screw to pass completely through the insert to achieve optimum performance.
Request information about:
Series: 20110 Type: FV Spancert* Expansion Insert for Wood