Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Moldcert* insert for Moulding in all Plastics
Click Here for larger image
Series 20109 Type : HK
Moldcert* insert for Moulding in all Plastics
Moldcert* insert for Moulding in all Plastics
| Part No. | Thread M | Body Diam A | Length B | Thread Length C |
| Part No. | Thread M | Body Diam A | Length B | Thread Length C | |||
| HK030H075 | M3 | 5.0 | 7.5 | 7.10 |  | ||
| HK035H095 | M3.5 | 5.0 | 9.5 | 8.00 | | ||
| HK040H105 | M4 | 6.00 | 10.50 | 8.40 | | ||
| HK050H120 | M5 | 7.00 | 12.00 | 9.00 | | ||
| HK060H150 | M6 | 10.00 | 15.00 | 10.00 | | ||
| HK080H170 | M8 | 11.50 | 17.00 | 13.30 | | ||
| HK100H180 | M10 | 13.50 | 18.00 | 14.35 | | ||
| HK120H220 | M12 | 16.00 | 22.00 | 18.50 | | ||
| HK140H220 | M14 | 18.00 | 22.00 | 18.50 | | ||
| HK160H220 | M16 | 20.00 | 22.00 | 18.50 | |
HK Moldcert Insert Series are suitable for moulding into all types of plastic material during the moulding cycle. The helix knurl ensures a high resistance to torque and the central undercut offers a high pullout load resistance. The insert in standard format offers a counterbore that can be used for insert location on the pin. These inserts are usually blind but may be special ordered as through type.
Request information about:
Series: 20109 Type: HK Moldcert* insert for Moulding in all Plastics