Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Moldcert* insert for Moulding in all Plastics
Click Here for larger image
Series 20109 Type : FT
Moldcert* insert for Moulding in all Plastics
Moldcert* insert for Moulding in all Plastics
| Part No. | Thread M | Dim A | Dim B + 0.25 | Dim C min | Dim D | Dim E +/-0.02 | Dim F - 0.02 | Dim G +/- 0.1 | Dim H +/- 0.013 | Taper 1 Inc. | Dim J |
| Part No. | Thread M | Dim A | Dim B + 0.25 | Dim C min | Dim D | Dim E +/-0.02 | Dim F - 0.02 | Dim G +/- 0.1 | Dim H +/- 0.013 | Taper 1 Inc. | Dim J | |||
| FT020H054 | M2 | 3.5 | 5.35 | 3.60 | 1.00 | 0.80 | 1.55 | 2.65 | 2.300 | 6.00 | 3.00 |  | ||
| FT025H063 | M2.5 | 4.30 | 6.25 | 4.00 | 1.15 | 0.90 | 2.00 | 3.00 | 2.800 | 5.00 | 3.50 | | ||
| FT030H072 | M3 | 4.70 | 7.20 | 4.60 | 1.30 | 1.05 | 2.45 | 3.40 | 3.125 | 4.50 | 4.00 | | ||
| FT035H091 | M3.5 | 5.50 | 9.10 | 6.00 | 1.55 | 1.30 | 2.85 | 4.55 | 3.750 | 4.50 | 4.70 | | ||
| FT040H101 | M4 | 6.30 | 10.05 | 6.70 | 1.80 | 1.55 | 3.25 | 5.00 | 4.425 | 4.50 | 5.40 | | ||
| FT050H111 | M5 | 7.35 | 11.05 | 7.40 | 1.95 | 1.70 | 4.15 | 5.55 | 5.125 | 5.00 | 6.00 | | ||
| FT060H143 | M6 | 9.85 | 14.25 | 8.10 | 2.05 | 1.80 | 4.95 | 6.15 | 6.600 | 5.50 | 8.00 | | ||
| FT080H164 | M8 | 11.45 | 16.35 | 11.10 | 2.25 | 2.00 | 6.70 | 9.00 | 8.500 | 6.00 | 10.00 | | ||
| FT100H178 | M10 | 13.85 | 17.75 | 11.90 | 2.35 | 2.10 | 8.40 | 9.70 | 10.500 | 6.00 | 12.00 | |
The FT range of blind ended threaded inserts has been introduced to meet the needs of those moulders, who, for a variety of reasons, prefer to mould-in. The unique design of 3 herringbone knurl bands combined with the included recesses give extremely high levels of performance in both pull-out and torque tests. Blind-ended inserts prevent the ingress of plastic, as does the special counterbore which also facilitates easy assembly upon locating pins. Another advantage is the rolled thread tapping procedures used during manufacture to reduce the risk of metal dust affecting the mouldings. The blind end being 'Pip' free results in a reduction of the risk of contamination and assists automatic insert loaders. The unique design of this insert ensures high levels of performance. Normally produced in brass, other materials are possible on quotation. In some applications, these inserts can be installed after moulding.
Request information about:
Series: 20109 Type: FT Moldcert* insert for Moulding in all Plastics