Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Thermocert* Heatstake Insert for Thermoplastic
Click Here for larger image
Series 20106 Type : HV
Thermocert* Heatstake Insert for Thermoplastic
Thermocert* Heatstake Insert for Thermoplastic
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Hole diam. +.1 |
| Part No. | Thread M | Insert Length L | Ext. diam. A | Lead dia. P | Hole diam. +.1 | |||
| HV020H032 | M2 | 3.20 | 3.60 | 3.10 | 3.20 |  | ||
| HV020H040 | M2 | 4.00 | 3.65 | 3.10 | 3.20 | | ||
| HV025H036 | M2.5 | 3.55 | 4.60 | 3.90 | 4.00 | | ||
| HV025H058 | M2.5 | 5.75 | 4.75 | 3.90 | 4.00 | | ||
| HV030H036 | M3 | 3.55 | 4.60 | 3.90 | 4.00 | | ||
| HV030H058 | M3 | 5.75 | 4.75 | 3.90 | 4.00 | | ||
| HV035H038 | M3.5 | 3.80 | 5.40 | 4.70 | 4.80 | | ||
| HV035H072 | M3.5 | 7.15 | 5.55 | 4.70 | 4.80 | | ||
| HV040H047 | M4 | 4.70 | 6.25 | 5.55 | 5.60 | | ||
| HV040H082 | M4 | 8.15 | 6.40 | 5.55 | 5.60 | | ||
| HV050H064 | M5 | 6.35 | 7.05 | 6.30 | 6.40 | | ||
| HV050H096 | M5 | 9.55 | 7.15 | 6.30 | 6.40 | | ||
| HV060H079 | M6 | 7.90 | 8.65 | 7.90 | 8.00 | | ||
| HV060H128 | M6 | 12.75 | 8.75 | 7.90 | 8.00 | | ||
| HV080H128 | M8 | 12.75 | 10.35 | 9.50 | 9.60 | |
Heat-Ultrasonic Inserts HV are designed for installation into parallel holes produced with standard core pins. 1 deg. Draft angle is acceptable. The unique interrelated knurl and groove design, together with a gradual four-stepped increase in diameter is engineered to yield the best combination of torque resistance, pullout resistance, low radial stress, and ease of insertion. The headed version provides increased resistance to jack out loads situations by creating a larger bearing surface for mating parts. This feature can also be used for providing extra surface area for electrical contacts to improve circuit continuity.
Request information about:
Series: 20106 Type: HV Thermocert* Heatstake Insert for Thermoplastic