Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Thermocert* Heatstake Headed Insert for Thermoplastic
Click Here for larger image
Series 20106 Type : HIS
Thermocert* Heatstake Headed Insert for Thermoplastic
Thermocert* Heatstake Headed Insert for Thermoplastic
| Part No. | Thread A | Ext. Diam. E | Head dia. E1 | Head thickn K | Length B | Hole dia. L+0.1 | Min Wall W |
| Part No. | Thread A | Ext. Diam. E | Head dia. E1 | Head thickn K | Length B | Hole dia. L+0.1 | Min Wall W | |||
| HIS020H046 | M2.0 | 3.60 | 4.80 | 0.60 | 4.60 | 3.2 | 2.0 |  | ||
| HIS025H064 | M2.5 | 4.60 | 5.60 | 0.60 | 6.40 | 4.0 | 2.3 | | ||
| HIS030H064 | M3.0 | 4.60 | 5.60 | 0.60 | 6.40 | 4.0 | 2.3 | | ||
| HIS035H080 | M3.5 | 5.40 | 6.40 | 0.80 | 8.00 | 4.8 | 2.5 | | ||
| HIS040H090 | M4.0 | 6.30 | 7.20 | 0.80 | 9.00 | 5.6 | 2.5 | | ||
| HIS050H105 | M5.0 | 7.00 | 8.00 | 1.00 | 10.50 | 6.4 | 2.7 | | ||
| HIS060H140 | M6.0 | 8.60 | 9.50 | 1.30 | 14.00 | 8.0 | 3.0 | | ||
| HIS080H140 | M8.0 | 10.20 | 11.00 | 1.30 | 14.00 | 9.6 | 3.5 | | ||
| HIS100H140 | M10 | 12.30 | 14.00 | 1.30 | 14.00 | 11.7 | 4.0 | |
The HIS Insonic Range of Inserts are designed to provide strong reusable thread forms in Thermoplastic materials. The unique diametrically opposing helix knurls create the herringbone pattern which provides exceptional resistance to torque loads and facilitates the flow of plastic into the two recessed grooves providing greater pullout loads than alternative designs. These inserts perform particularly well in parallel holes.
Request information about:
Series: 20106 Type: HIS Thermocert* Heatstake Headed Insert for Thermoplastic