|
|
|
|
|
|
|
|
|
|
|
|
|
Request a sample
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 20105 Type : TCT
|
|
Click on the above image for a larger version and scroll to select larger sizes.
|
Screwin* Insert for Thermoplastic
|
TCT inserts are recommended for thermoplastic applications. Driven by the internal thread the insert cuts a mating thread with the three equally spaced cutting facets as it is driven forward. The buttress thread form minimises plastic displacement therefore reducing installation stresses. The flat upper flank does not vector the tensile, jackout or torque load in a radial direction, therefore radial or hoop stresses are minimised under load. The effect is to enable the use of thinner walled bosses. The resulting external thread form buried deep into the substrate provides a high performance insert capable of withstanding severe pull out loads and torque resistance.
|
|
All information is given for guidance only and designers should satisfy themselves as to the suitability of the specification by requesting samples
|
|
| Part No. |
Thread M |
Ext Diam A |
Length L |
Rec. Hole Diam |
Request Sample |
|
#
|
|
