Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Screwin* Insert for Thermoset
Click Here for larger image
Series 20105 Type : SC
Screwin* Insert for Thermoset
Screwin* Insert for Thermoset
| Part No. | Int.Thread M | Ext Ø A | Length H | Hole Ø soft L | Hole Ø hard L | Hole Depth P | Weight - Steel |
| Part No. | Int.Thread M | Ext Ø A | Length H | Hole Ø soft L | Hole Ø hard L | Hole Depth P | Weight - Steel | |||
| SC025H04__ | M2.5 | 4.0 | 4.0 | 3.7-3.8 | 3.8-3.9 | 5.0 | 0.030 |  | ||
| SC025H06__ | M2.5 | 4.5 | 6.0 | 4.0-4.1 | 4.1-4.2 | 8.0 | 0.038 | | ||
| SC030H05__ | M3 | 5.0 | 5.0 | 4.7-4.8 | 4.8-4.9 | 7.0 | 0.042 | | ||
| SC030H06__ | M3 | 5.0 | 6.0 | 4.5-4.6 | 4.6-4.7 | 8.0 | 0.045 | | ||
| SC035H06__ | M3.5 | 6.0 | 6.0 | 5.3-5.4 | 5.5-5.6 | 8.0 | 0.070 | | ||
| SC035H08__ | M3.5 | 6.0 | 8.0 | 5.3-5.4 | 5.5-5.6 | 10.0 | 0.078 | | ||
| SC040H07__ | M4 | 6.5 | 7.0 | 5.8-5.9 | 6.0-6.1 | 9.0 | 0.090 | | ||
| SC040H08__ | M4 | 6.5 | 8.0 | 5.8-5.9 | 6.0-6.1 | 10.0 | 0.092 | | ||
| SC050H08__ | M5 | 8.0 | 8.0 | 7.1-7.2 | 7.3-7.5 | 10.0 | 0.145 | | ||
| SC050H10__ | M5 | 8.0 | 10.0 | 7.1-7.2 | 7.3-7.5 | 13.0 | 0.159 | | ||
| SC060H10__ | M6 | 9.0 | 10.0 | 8.1-8.2 | 8.3-8.5 | 12.0 | 0.175 | | ||
| SC060H12__ | M6(a) | 9.0 | 12.0 | 8.1-8.2 | 8.3-8.5 | 15.0 | 0.235 | | ||
| SC060H14__ | M6 | 10.0 | 14.0 | 8.6-8.8 | 8.9-9.2 | 17.0 | 0.358 | | ||
| SC080H13__ | M8 | 12.0 | 13.0 | 10.6-10.8 | 10.9-11.2 | 16.0 | 0.485 | | ||
| SC080H15__ | M8 | 12.0 | 15.0 | 10.6-10.8 | 10.9-11.2 | 18.0 | 0.509 | | ||
| SC100H16__ | M10 | 14.0 | 16.0 | 12.6-12.8 | 12.9-13.2 | 19.0 | 0.715 | | ||
| SC100H18__ | M10 | 14.0 | 18.0 | 12.6-12.8 | 12.9-13.2 | 22.0 | 0.778 | | ||
| SC120H22__ | M12 | 16.0 | 22.0 | 14.6-14.8 | 14.9-15.2 | 26.0 | 1.116 | | ||
| SC140H24__ | M14 | 18.0 | 24.0 | 16.6-16.8 | 16.9-17.2 | 28.0 | 1.470 | | ||
| SC160H22__ | M16 | 20.0 | 22.0 | 18.6-18.8 | 18.9-19.2 | 27.0 | 0.500 | | ||
| SC180H24__ | M18 | 22.0 | 24.0 | 20.6-20.8 | 20.9-21.2 | 29.0 | 2.045 | | ||
| SC200H27__ | M20 | 26.0 | 27.0 | 24.6-24.8 | 24.9-25.2 | 32.0 | 3.912 | | ||
| SC220H30__ | M22 | 26.0 | 30.0 | 24.6-24.8 | 24.9-25.2 | 36.0 | 3.200 | | ||
| SC240H30__ | M24 | 30.0 | 30.0 | 28.6-28.8 | 28.9-29.2 | 36.0 | 5.442 | | ||
| SC270H30__ | M27 | 34.0 | 30.0 | 32.6-32.8 | 32.9-33.2 | 36.0 | 7.124 | | ||
| SC300H40__ | M30 | 36.0 | 40.0 | 34.6-34.8 | 34.9-35.2 | 46.0 | 9.416 | |
Available in Steel Zinc Plated Code 60, Steel Case Hardened Zinc Plated Code CH, Brass Self Colour Code BR Stainless Steel Code SS. SC inserts are recommended for thermoset or thermoplastic applications and some light alloys. Driven by the internal thread the slot pointing towards the bottom of the hole provides two effective cutting flutes and an area for the chips to remain following installation prior to removal of the drive mandrel. The resulting external thread form buried deep into the substrate provides a high performance insert capable of withstanding severe tensile/pull out loads and torque resistance.
Request information about:
Series: 20105 Type: SC Screwin* Insert for Thermoset