Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Sonicert* Ultrasonic stake Headed Insert for Thermoplastic
Click Here for larger image
Series 20103 Type : THC
Sonicert* Ultrasonic stake Headed Insert for Thermoplastic
Sonicert* Ultrasonic stake Headed Insert for Thermoplastic
| Part No. | Thread M | Length H | Body Diam D | Lead Diam C | Head Diam T | Head Depth S | Hole Diam d-0.1 | Hole Depth P | Min Wall E | L Diam | G Depth +0.1 |
| Part No. | Thread M | Length H | Body Diam D | Lead Diam C | Head Diam T | Head Depth S | Hole Diam d-0.1 | Hole Depth P | Min Wall E | L Diam | G Depth +0.1 | |||
| THC025H050 | M2.5 | 5.0 | 4.0 | 3.5 | 5.5 | 0.5 | 3.6 | 6.5 | 1.0 | 5.6 | 0.5 |  | ||
| THC030H055 | M3 | 5.5 | 4.5 | 3.9 | 6.0 | 0.5 | 4.1 | 7.0 | 1.1 | 6.1 | 0.5 | | ||
| THC035H060 | M3.5 | 6.0 | 5.5 | 4.7 | 7.0 | 0.5 | 5.1 | 7.5 | 1.3 | 7.1 | 0.5 | | ||
| THC040H075 | M4 | 7.5 | 6.0 | 5.4 | 7.5 | 0.8 | 5.5 | 9.0 | 1.4 | 7.6 | 0.8 | | ||
| THC050H080 | M5 | 8.0 | 7.0 | 6.4 | 8.5 | 0.8 | 6.5 | 9.5 | 1.7 | 8.6 | 0.8 | | ||
| THC060H090 | M6 | 9.0 | 8.5 | 7.9 | 10.5 | 0.8 | 8.0 | 11.0 | 2.0 | 10.6 | 0.8 | | ||
| THC080H100 | M8 | 10.0 | 10.0 | 9.4 | 12.0 | 1.0 | 9.5 | 13.0 | 2.4 | 12.1 | 1.0 | | ||
| THC100H130 | M10 | 13.0 | 12.0 | 11.2 | 14.0 | 1.0 | 11.4 | 15.5 | 2.9 | 14.1 | 1.0 | |
THC inserts are recommended for thermoplastic applications their geometric shape and sharp pointed barbs ensures swift installation and complete flow of material to encapsulate the insert providing ultimate resistance to torque loading and maximum tensile strength. The head provides the useful feature of eliminating Jack out loads when used with a mating part which has a larger hole than the standard insert diameter. It can also be used as a contact point for electrical terminations.
Due to the elimination of installation stresses by use of heat or ultrasonic the wall thickness of bosses can be reduced to prevent any shrinkage witness on the opposite face of the moulding.
If however this insert is used for pressing into plastic we recommend the use of thicker walled bosses to absorb the resulting hoop stresses. These stresses are minimised by the vane type barbs relaxing during installation, only to become firmly embedded into the substrate due to th
Due to the elimination of installation stresses by use of heat or ultrasonic the wall thickness of bosses can be reduced to prevent any shrinkage witness on the opposite face of the moulding.
If however this insert is used for pressing into plastic we recommend the use of thicker walled bosses to absorb the resulting hoop stresses. These stresses are minimised by the vane type barbs relaxing during installation, only to become firmly embedded into the substrate due to th
Request information about:
Series: 20103 Type: THC Sonicert* Ultrasonic stake Headed Insert for Thermoplastic