Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Sonicert* Ultrasonic stake Insert stud for Thermoplastic
Click Here for larger image
Series 20103 Type : GTH
Sonicert* Ultrasonic stake Insert stud for Thermoplastic
Sonicert* Ultrasonic stake Insert stud for Thermoplastic
| Part No. | Thread M | Length H | Outer Diam D | Lead Diam C | Hole Diam d-0.1 | Hole Depth P | Min Wall E | Stud Length F |
| Part No. | Thread M | Length H | Outer Diam D | Lead Diam C | Hole Diam d-0.1 | Hole Depth P | Min Wall E | Stud Length F | |||
| GTHM03L05 | M3 | 5.5 | 4.5 | 3.9 | 4.1 | 7.0 | 1.1 | 5mm |  | ||
| GTHM03L10 | M3 | 5.5 | 4.5 | 3.9 | 4.1 | 7.0 | 1.1 | 10mm | | ||
| GTHM03L15 | M3 | 5.5 | 4.5 | 3.9 | 4.1 | 7.0 | 1.1 | 15mm | | ||
| GTHM04L05 | M4 | 7.5 | 6.0 | 5.4 | 5.5 | 9.0 | 1.4 | 5mm | | ||
| GTHM04L10 | M4 | 7.5 | 6.0 | 5.4 | 5.5 | 9.0 | 1.4 | 10mm | | ||
| GTHM04L15 | M4 | 7.5 | 6.0 | 5.4 | 5.5 | 9.0 | 1.4 | 15mm | | ||
| GTHM05L10 | M5 | 8.0 | 7.0 | 6.4 | 6.5 | 9.5 | 1.7 | 10mm | | ||
| GTHM05L15 | M5 | 8.0 | 7.0 | 6.4 | 6.5 | 9.5 | 1.7 | 15mm | | ||
| GTHM05L20 | M5 | 8.0 | 7.0 | 6.4 | 6.5 | 9.5 | 1.7 | 20mm | | ||
| GTHM06L10 | M6 | 9.0 | 8.5 | 7.9 | 8.0 | 11.0 | 2.0 | 10mm | | ||
| GTHM06L15 | M6 | 9.0 | 8.5 | 7.9 | 8.0 | 11.0 | 2.0 | 15mm | | ||
| GTHM06L20 | M6 | 9.0 | 8.5 | 7.9 | 8.0 | 11.0 | 2.0 | 20mm | | ||
| GTHM08L15 | M8 | 11.0 | 10.0 | 9.4 | 9.5 | 13.0 | 2.4 | 15mm | | ||
| GTHM08L20 | M8 | 11.0 | 10.0 | 9.4 | 9.5 | 13.0 | 2.4 | 20mm | | ||
| GTHM08L25 | M8 | 11.0 | 10.0 | 9.4 | 9.5 | 13.0 | 2.4 | 25mm | | ||
| GTHM10L15 | M10 | 13.0 | 12.0 | 11.2 | 11.4 | 15.5 | 2.9 | 15mm | | ||
| GTHM10L20 | M10 | 13.0 | 12.0 | 11.2 | 11.4 | 15.5 | 2.9 | 20mm | | ||
| GTHM10L25 | M10 | 13.0 | 12.0 | 11.2 | 11.4 | 15.5 | 2.9 | 25mm | |
GTH studs are recommended for thermoplastic applications. Their sharp pointed barbs ensure the complete flow of material to encapsulate the body, providing ultimate resistance to torque loading and maximum tensile strength. Various stud lengths offer the designer ease of location of mating parts and therefore reduced assembly costs. Due to elimination of installation stresses by use of heat or ultrasonic, the wall thickness of bosses can be reduced to prevent any shrinkage witness on the opposite face of the moulding. If however this insert is used for pressing into plastic, we recommend the guidelines used for the insert Type 20103 TH.
Request information about:
Series: 20103 Type: GTH Sonicert* Ultrasonic stake Insert stud for Thermoplastic