|
|
|
|
|
|
|
|
|
|
|
|
|
Request a sample
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 20101 Type : DM
|
|
Click on the above image for a larger version and scroll to select larger sizes.
|
Spancert* Expansion Insert Short for Thermoset
DM inserts are recommended for thermoset plastic applications. Their geometric shape and sharp pointed barbs eliminates any danger of the moulded bosses splitting on installation or when tightening of the mating screw occurs. The wall thickness of bosses should generally be at least one half of the insert diameter.
Different materials may require slight modifications to the hole dimensions stated above and it is essential that the hole depth is sufficient to allow the screw to pass completely through the insert to achieve optimum performance.
|
|
All information is given for guidance only and designers should satisfy themselves as to the suitability of the specification by requesting samples
|
|
| Part No. |
Thread M |
Length H |
Outer Diam D1 |
Lead Diam C |
Hole Diam d-0.1 |
Hole Depth min |
Min Wall E |
Request Sample |
|
#
|
|
