Request a sample
Sign up to our Monthly Newsletter...
Got a question
or an enquiry?
Click here and our friendly staff
will be happy to assist you.
will be happy to assist you.
Click here for a PDF
version of this page.
version of this page.
All information is given for guidance only
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
and designers should satisfy themselves as to
the suitability of the specification
by requesting samples
Spancert* Expansion Insert for Thermoset
Click Here for larger image
Series 20101 Type : DM
Spancert* Expansion Insert for Thermoset
Spancert* Expansion Insert for Thermoset
| Part No. | Thread M | Length H | Outer Diam D1 | Lead Diam C | Hole Diam d -0.1 | Hole Depth min | Min Wall E |
| Part No. | Thread M | Length H | Outer Diam D1 | Lead Diam C | Hole Diam d -0.1 | Hole Depth min | Min Wall E | |||
| DM020H040 | M2 | 4.0 | 3.4 | 3.4 | 3.5 | 5.5 | 1.8 |  | ||
| DM025H040 | M2.5 | 4.0 | 3.8 | 3.9 | 4.0 | 5.5 | 2.0 | | ||
| DM025H065 | M2.5 | 6.5 | 3.8 | 3.9 | 4.0 | 8.0 | 2.0 | | ||
| DM030H050 | M3 | 5.0 | 3.9 | 3.9 | 4.0 | 6.5 | 2.0 | | ||
| DM030H065 | M3 | 6.5 | 3.9 | 3.9 | 4.0 | 8.0 | 2.0 | | ||
| DM035H050 | M3.5 | 5.0 | 4.8 | 4.9 | 5.0 | 6.8 | 2.5 | | ||
| DM035H080 | M3.5 | 8.0 | 4.8 | 4.9 | 5.0 | 9.8 | 2.5 | | ||
| DM040H080 | M4 | 8.0 | 5.4 | 4.9 | 5.5 | 9.8 | 2.8 | | ||
| DM040H095 | M4 | 9.5 | 5.4 | 4.9 | 5.5 | 11.3 | 2.8 | | ||
| DM050H095 | M5 | 9.5 | 6.4 | 5.9 | 6.5 | 11.3 | 3.3 | | ||
| DM050H110 | M5 | 11.0 | 6.4 | 5.9 | 6.5 | 13.0 | 3.3 | | ||
| DM060H095 | M6 | 9.5 | 7.9 | 7.0 | 8.0 | 11.3 | 4.0 | | ||
| DM060H125 | M6 | 12.5 | 7.9 | 7.0 | 8.0 | 14.5 | 4.0 | | ||
| DM080H100 | M8 | 10.0 | 9.4 | 9.0 | 9.5 | 12.0 | 4.8 | | ||
| DM100H130 | M10 | 13.0 | 10.9 | 11.0 | 11.5 | 15.0 | 5.8 | |
DM inserts are recommended for thermoset plastic applications. Their geometric shape and sharp pointed barbs eliminate any danger of the moulded bosses splitting on installation or when tightening of the mating screw occurs. The wall thickness of bosses should generally be at least one half of the insert diameter. Different materials may require slight modifications to the hole dimensions stated above and it is essential that the hole depth is sufficient to allow the screw to pass completely through the insert to achieve optimum performance.
Request information about:
Series: 20101 Type: DM Spancert* Expansion Insert for Thermoset